Frame: The test frame has 2 columns. It is suitable for Universal Multifunctional tests (CBR, Marshall etc.).

Load Measurement: Load, measure and control with Load Cell that can be applied between 2% to 100% of Capacity as class 1 or better accuracy according to the EN-ISO-7500-1 standard.

Displacement Measurement: the device has a lvdt with measuring length of 25 mm and accuracy of 0.01 mm. for displacement measurement.

Servo electromechanic Drive system: It has precise stepper motor drive mechanism. It can perform precise loads with closed-loop control with mechanic precision gear stepper motor system.

Control Unit: Control unit of machine is “Sematron Touch Series” advanced controller, control unit allows constant load increase adjustable between 0.05 kN/Sec – 25kN/Sec and displacement increase adjustable 0,001 mm/min - 60 mm/min, mechanical piston release load automatically at sample break, feasible for simple strength test – ramp loading – holding load constant - sinusoidal waveform with Loading and Unloading Control. 1kHz data acquisition and control capability which allows accuracy in control and reading load, special close loop (PID) control with double loop, automatic gain feature for different sensors, automatic calibration function. The electronic control unit has minimum 2 analogue and 3 digital channels (as optionally). Semi-dynamic applications can be performed at low frequency and amplitudes.

Control Unit Display: 10 inch touch capacitive display, easy-to-adjust user-friendly interface, built-in USB port to directly receive results directly from the LCD screen without using Pc and internet connection to control unit via external USB port to enable LCD control unit to communicate with computer, (optional, mini printer support and compatible with all HP printers), software update via USB, ability to save test results in excell and pdf format, print results directly from LCD (Optional, mini printer support and compatible with all HP printers) The connection between the Lcd and the controller (Sematron Touch Series) is achieved via CAN bus, all measurement units available (N, kN, mode etc.), automatic reset before test, high accuracy and stability control, but s password protected calibration menu, characterized by adding the information to the user-defined reports.

Computer Software: The test system is provided with Universal Computer Test Software which allows computer and device control. The computer software provides the same features and menus as the control unit screen, the data can be saved on the computer. The computer software communicates with the control unit via USB.