Test system:

Consists of a  double-ended, fatigue-rated servo hydraulic actuator , a hydraulic control unit equipped with a servo valve, power pack (hydraulic unit), electronic control unit, heat exchanger system (chiller).

Load Measurement and Control:

Test system comes with a fatigue rated load cell for load measurement and control. Test system is feasible to carrying out load controlled test with class 1 according to EN 7500-1 standard. Load control resolution is 20bit. Special EEprom plug with Self-recognition system for Load cell. Internal memory to store sensor calibration data and other settings.

Displacement Measurement and Control:

Test system comes with a MTS brand SSI type non-contact electromagnetic linear displacement sensor with 1 micron measurement and control resolution. Displacement sensor has very fast response and can work up to 1 m/sec. Displacement sensor is placed inside the actuator for high accuracy. Special EEprom plug with Self-recognition system for displacement sensor. Internal memory to store sensor calibration data and other settings.

Servo-Hydraulic Power Pack:

System comes with advanced hydraulic Power Unit (60l/min) with gear type hydraulic pump driven by electrical motor, smooth and high flow rate, with manifold and pressure limit valve, oil tank, comes with necessary joints and hose. Hydraulic power unit is equipped with high response and accurate servo valve. Hydraulic power unit also equipped with heat exchanger. The test system is suitable for carrying out load and displacement controlled fatigue tests. The system is suitable for operation with 380 V, 50 Hz.

Electronic Control Unit:

Test system comes with a special EDCi Series closed-loop controlled electronic control unit. The electronic control unit of system is (German made) with 10000 samples per second data acquisition speed. Accurate synchronization between frame and sensors will be done/controlled by advanced PID or close loop configuration. Electronic control unit has total 5 channels (2 internal, 3 external (optional)). Due to these channels, electronic control unit can control upto 5 no. sensors at same time.  Electronic control unit is feasible to attach and control video extensometer, laser extensometer, LVDT, automatic extensometer, strain gauge, load cell, SSI and TTL type sensors. Special Eeprom sensor plugs can store calibration and sensor data inside it. Due to this feature control unit can read sensor and calibration data even if user change it with new unit.  User can read and control each attached sensor with control unit, for example; 2nd load cell, LVDTs and extensometers.

Handheld Unit:

Test system comes with one remote control unit. RMCi Series Handheld unit has a smart key, User can move actuator up and down with this remote control unit during setting up samples in test frame without using PC. Actuator movement and speed can be controlled easily, precisely, accurately and safely.

Besmak Universal Testing Software:

Test System comes with BESMAK advanced dynamic test software. BESMAK dynamic software is user friendly interface. User can perform sinusoidal, triangular, quadratic and ramp loading. User also can write its own test procedure. Easy-to-understand icons and workflows make it easy to train new or experienced users, simplifying operator training, and allowing you to start testing even faster. Meticulously crafted visual design, gives the most comprehensive view of the test workspace. User can make and save test templates with specific name / test standard etc. Automatic Save option for test report and/or raw values. User defined graph axis to get real time values of desired sensor. User defined report setup and results definition. Series test option to combine test graphs and results of multiple samples. Real time graphic analysing feature to see graph data point to point. User can perform tensile, compression, bending, shear and special test easily. Test settings, test templates, loading sequences and device settings can be easily done by the software. BESMAK Universal Testing software supports multi languages which make it attractive for international users. Over load detection and sample protection features for advance testing applications to protect sensitive samples. Auto tare option for each connected sensor. Auto positioning and return after test feature for actuator. Software supports All SI and Matric units for sensors and measurements. Test result can be transferred to Excel format(Raw Values) or PDF format(report format)